Nvidia 754 User Manual download pdf (Page 25)

Installation

Page 3-9

FDD: Floppy Controller Connector

This connects to the floppy disk drive.

IDE1/IDE2: Ultra DMA-100/133 Primary/Secondary

IDE Connector

This mainboard is equipped with 2 IDE connectors

to support up to 4 ATA-100/133 IDE drives.

It supports PIO and DMA mode operations for

maximum data transfer rate of 133MB/sec per channel.

PW1

IDE1IDE2

FDD

PW12

PW1: 24-pin ATX Power Connector

PW12: 4-pin ATX12V Power Connector

The mainboard is equipped with a standard 24-pin

ATX main power connector and a 4-pin +12V

power connector for connecting an ATX12V

power supply. The plugs of the power cables are

designed to fit in only one orientation. Insert the

plugs into the connectors until they fit in place.

40 39

IDE1/IDE2

34 33

FDD



 When using two IDE drives on the same

connector, one must be set to Master mode and

the other to Slave mode. Refer to your disk

drive user’s manual for details.

Caution:

The PW1 and PW12 Power Connector must be used simultaneously.

-12V3.3V

Ground+5V

PS-ON+5V

-5VPW-OK

+5V5VSB

+5V

Ground

+12V

3.3V

+12V+12V

3.3V3.3V

GroundGround

PW1

PW12



 The board requires a minimum of 400 Watt power

supply to operate. Your system configuration (amount

of memory, add-in cards, peripherals, etc.) may exceed

this minimum power requirement. To ensure adequate

power, for SLi mode use a 550 Watt or greater power

supply.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 77 78

Comments to this Manuals

No comments

Nvidia 754 User Manual Page 25

Comments to this Manuals

Related products and manuals for Hardware Nvidia 754